White Rodgers 1F85-277 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 111)

COMFORTPRO

AIR CLEANERS

AIR CLEANER

PROGRAMMING OPTIONS

Program Setting 8: Time without high voltage after

Service (Electronic Air Cleaners only)

In setting 8 STANDBY led will ﬂash eight times every two

seconds.

Setting a speciﬁc time for no high voltage after servicing is

useful when the ﬁlter cells are damp or condensed in winter

time. This setting will go back to default value if power is

interrupted to the air cleaner.

• Default: OFF (all leds are off), when the air cleaner is switched on,

there’s always high voltage on the cell(s).

• Press S: led • (LOW) will light up, meaning you’ve set the time of

no high voltage to 30 minutes.

• Press S: led •• (MEDIUM) will light up, meaning you’ve set the

time of no high voltage to 60 minutes.

• Press S: led ••• (HIGH) will light up, meaning you’ve set the time

of no high voltage to 120 minutes.

• Press S: led •••• (TURBO) will light up, meaning you’ve set the

time of no high voltage to 240 minutes.

• If you want to go back to one of the previous time setting levels,

press T.

• Press PROGRAM to conﬁrm setting 8. The air cleaner will return

to the normal running mode.

Reset to factory default

To reset the factory default settings:

Open the inlet grid, press the panel button (>> ). While pressing the

panel button (>> ) close the inlet grid. Release the panel button (>> )

when you hear two beeps.

Everything is now back into the default setting, except the Service

Indicator (hours in use).

9 FILTER REPLACEMENT / CLEANING

In order to open the inlet grid (i.e. access the ﬁlter components), a

narrow round screwdriver type tool will be needed (such as a torx

type). The inlet grid is secured by two mechanical clips. To release

these clips there are two access holes parallel to the control board

faceplate on the inlet grid (approx. 3½” from the sides).

Insert the tool into the access holes and gently push further through

some light resistance. This will allow the clips to be “unlocked” and

thus the inlet grid will open easily.

DO NOT PULL THE DOOR OPEN WITHOUT RELEASING THE

CLIPS.

9.1 Preﬁlter replacement

The disposable preﬁlter can only be used once and cannot be

cleaned. Do not turn the preﬁlter around since it can only be used in

one ﬂow direction.

9.2 Electronic ﬁlter cleaning

A crackling or snapping sound will be heard occasionally during use

of the air cleaner. This is normal and is caused by high voltage arc-

ing in the ﬁlter. Cleaning the electronic ﬁlter is necessary when the

crackling is heard frequently.

For maximum efﬁciency your air cleaner cell(s) should be

cleaned regularly.

www.white-rodgers.com

234

TECHNICAL HELP

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 133 134

Kommentare zu diesen Handbüchern

Keine Kommentare

White Rodgers 1F85-277 Anleitung zur Fehlerbehebung Seite 111

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Split-System-Klimaanlagen White Rodgers 1F85-277