White-rodgers 1F81-71 Bedienungsanleitung PDF herunterladen (Seite 1)

To prevent electrical shock and/or equipment damage

disconnect electric power to system at main fuse or

circuit breaker box until installation is complete.

Do not use on circuits exceeding specified voltage.

Higher voltage will damage control and could cause

shock or fire hazard.

Do not short out terminals on gas valve or primary

control to test. Short or incorrect wiring will damage

thermostat and could cause personal injury and/or

property damage.

Printed in U.S.A.

DESCRIPTION

1F81-71

Programmable Electronic

Digital Automatic Changeover Multi-stage Thermostat

INSTALLATION AND

OPERATION INSTRUCTIONS

PART NO. 37-5938B

Replaces 37-5938A

9912

Operator: Save these instructions for future use!

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY

BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE

PERSONAL INJURY AND/OR PROPERTY DAMAGE.

Your new White-Rodgers 5-Day/2-Day Digital Multi-stage Ther-

mostat uses the technology of a solid-state microcomputer to

provide precise time/temperature control. This thermostat offers

you the flexibility to design heating and cooling programs that fit

your needs.

Features:

• Separate 5-day (weekday) and 2-day (weekend) programming

with four separate time/temperature periods per program

• Simultaneous heat and cool program storage

• Optional C terminal (dual power option)

• Optional Energy Management Recovery (EMR)

PRECAUTIONS

SPECIFICATIONS

• Optional B and O terminals

• Preprogrammed temperature control

• LCD continuously displays set point, and alternately dis-

plays time and room temperature

• Temperature override until next program period

• Manual program override (HOLD temperature)

• °F/°C convertibility

• Temperature range 45° to 90°F

• Two-stage heat/two-stage cool

• Armchair programming capability

This thermostat is intended for use with a 24-volt system; do not

use this thermostat with a millivolt or line voltage system. If in

doubt about whether your wiring is millivolt, line, or low voltage,

have it inspected by a qualified heating and air conditioning

contractor or electrician.

Do not exceed the specification ratings.

All wiring must conform to local and national electrical codes and

ordinances.

This control is a precision instrument, and should be handled

carefully. Rough handling or distorting components could cause

the control to malfunction.

ELECTRICAL DATA

Electrical Rating:

20 to 30 VAC 50/60 Hz. or D.C.

0.05 to 1.5 Amps (Load per terminal)

2.5 Amps Maximum Total Load (All terminals combined)

THERMAL DATA

Setpoint Temperature Range:

45°F to 90°F (7°C to 32°C)

Operating Ambient Temperature Range:

32°F to 105°F

Operating Humidity Range:

0 to 90% RH (non-condensing)

Shipping Temperature Range:

-40°F to 150°F

APPLICATIONS

For use with:

• Heat/cool systems with up to two stages heat, two

stages cool

DO NOT USE WITH:

• Millivolt systems

• Systems exceeding 30 VAC and 2.5 amps

• 3-wire zoned hydronic heating systems

CAUTION

WARNING

WHITE-RODGERS DIVISION

EMERSON ELECTRIC CO.

9797 REAVIS ROAD

ST. LOUIS, MISSOURI 63123-5398

WHITE-RODGERS

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - WHITE-RODGERS

To prevent electrical shock and/or equipment damagedisconnect electric power to system at main fuse orcircuit breaker box until installation is comple

Seite 2 - INSTALLATION

2INSTALLATIONREMOVE OLD THERMOSTAT1. Shut off electricity at the main fuse box until installation iscomplete. Ensure that electrical power is disconne

Seite 3 - NOTE NOTE

3NOTE NOTEThe following wiring diagrams show typical terminal identifica-tion and wiring. For proper installation, refer to the originalmanufacturer&a

Seite 4 - Cooling System

4CHECK THERMOSTAT OPERATIONIf at any time during testing, your system does not operateproperly, contact a qualified serviceperson.Fan Operation1. Turn

Seite 5 - COOL-OFF-HEAT-AUTO

5OPERATIONBefore you begin programming your thermostat, you should befamiliar with its features and with the display and the location andoperation of

Seite 6 - PROGRAMMING YOUR THERMOSTAT

6• TEMPERATURE DISPLAY ADJUSTMENT — Your newthermostat has been accurately set in our factory. However,if you wish, you may adjust your new thermostat

Seite 7 - MO TU WE TH FR

7EXAMPLE: MO TU WE TH FRThis display window shows that for the 1st weekday period,the start time is 6:00 AM, and 70° is the programmedtemperature (thi

Seite 8

Kommentare zu diesen Handbüchern

Keine Kommentare

White-rodgers 1F81-71 Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Schalttafel White-rodgers 1F81-71 herunter. White Rodgers 1F81-71 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

White-rodgers 1F81-71 Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Schalttafel White-rodgers 1F81-71 herunter. White Rodgers 1F81-71 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schalttafel White-rodgers 1F81-71