White-rodgers 1F87-0261 Bedienungsanleitung PDF herunterladen

www.white-rodgers.com

This thermostat is intended for use with a low voltage NEC

Class II system. Do not use this thermostat with a line voltage

system. If in doubt about whether your wiring is millivolt, line,

or low voltage, have it inspected by a qualiﬁed heating and air

conditioning contractor or electrician.

Do not exceed the speciﬁcation ratings.

All wiring must conform to local and national electrical codes

and ordinances.

This control is a precision instrument, and should be handled

carefully. Rough handling or distorting components could

cause the control to malfunction.

Blue 2” Single Stage Thermostat

Installation and Operating Instructions

Save these instructions for future use!

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS

CAREFULLY BEFORE INSTALLING OR OPERATING THIS

CONTROL COULD CAUSE PERSONAL INJURY AND/OR

PROPERTY DAMAGE.

APPLICATIONS

For use with the following Class II systems:

• SingleStagesystems

• Single-stageheatpumpsystemswithnoAuxheat

DO NOT USE WITH:

• Systemsexceeding30VACand1.5amps

• 3-wirezonedhydronicheatingsystems

1F87-0261 Thermostat

Model Programming Choice

1F87-0261

7 Day Programmable

SPECIFICATIONS

Electrical Rating:

Battery Power ................................................. mVto30VAC,50/60HzorDC

 Input-Hardwire ................................................ 20to30VAC

Terminal Load ........................................................ 1.0Aperterminal,1.5Amaximumallterminalscombined

SetpointRange ...................................................... 45°to90°F(7°to32°C)

Differential(SingleStage) ...................................... Heat0.6°F;Cool1.2°F(adjustable)

Differential(HeatPump) ........................................ Heat1.2°F;Cool1.2°F(adjustable)

Operating Ambient ................................................. 32°to+105°F(0°to+41°C)

OperatingHumidity ................................................ 90%non-condensingmax.

ShippingTemperatureRange ................................ -40°to+150°F(-40°to+65°C)

Dimensions Thermostat ......................................... 3-3/4”Hx4-3/4”Wx1-1/2”D

PRECAUTIONS

To prevent electrical shock and/or equipment damage,

disconnect electric power to system at main fuse or

circuit breaker box until installation is complete.

CAUTION

Do not use on circuits exceeding speciﬁed voltage.

Higher voltage will damage control and could cause

shock or ﬁre hazard.

Do not short out terminals on gas valve or primary

control to test. Short or incorrect wiring will damage

thermostat and could cause personal injury and/or

property damage.

Thermostat installation and all components of the

system shall conform to Class II (current limited)

circuits per the NEC code. Failure to do so could

cause a ﬁre hazard.

WARNING

PART NO. 37-7038B

Replaces37-7038A

0950

1 2 3 4 5 6 ... 11 12

Inhaltsverzeichnis

Seite 1 - Replaces37-7038A

www.white-rodgers.comThis thermostat is intended for use with a low voltage NEC Class II system. Do not use this thermostat with a line voltage system

Seite 2 - INSTALLATION

10NOTES

Seite 3 - WIRING DIAGRAMS

11NOTES

Seite 4 - THERMOSTAT QUICK REFERENCE

www.white-rodgers.comWhite-Rodgersisadivision of Emerson Electric Co.The Emerson logo is a trademark and service mark of Emerson Electric Co.Homeo

Seite 5 - INSTALLER/CONFIGURATION MENU

2INSTALLATION REMOVE OLD THERMOSTAT1. Shutoffelectricityatthemainfuseboxuntilinstallationiscomplete. Ensure that electrical power is disco

Seite 6 - CHECK THERMOSTAT OPERATION

3ENERGY MANAGEMENT RECOVERY (EMR)When the EMR feature is activated the thermostat’smicrocomputer calculates the time it will take to c

Seite 7 - PROGRAMMING

4WIRING DIAGRAMS RCG WFigure 4. Typical wiring diagram for two transformer single stage systems with safety circuits in BOTH systemsChangeoverRelay*YO

Seite 8

5The conﬁguration menu allows you to set certain thermostat operating characteristics to your system or personal requirements.Toentertheme

Seite 9 - TROUBLESHOOTING

6Cooling System1. MoveSYSTEMswitchtoCOOL position.2. Press  to adjust thermostat setting below roomtemperature. The blower should come

Seite 10

7PROGRAMMING PROGRAMMING YOUR THERMOSTATThis section will help you plan your thermostat’s programtomeet your needs. For maximum comfort and

Seite 11

84. PressTIMEonce(theprogrammedtimewillash).Press or until your selected time appears. The time will changein15minuteincrements.Wh

Seite 12 - The Emerson logo is a

9TROUBLESHOOTING Reset OperationIf a voltage spike or static discharge blanks out the display or causes erratic thermostat operation, r

Kommentare zu diesen Handbüchern

Keine Kommentare

White-rodgers 1F87-0261 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Schalttafel White-rodgers 1F87-0261 herunter. White Rodgers 1F87-0261 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schalttafel White-rodgers 1F87-0261