White-rodgers 1F80-24 Bedienungsanleitung PDF herunterladen

WHITE-RODGERS DIVISION

EMERSON ELECTRIC CO.

9797 REAVIS ROAD

ST. LOUIS, MISSOURI 63123-5398

1F80-24

Programmable Electronic Digital Thermostat

INSTALLATION AND

OPERATION INSTRUCTIONS

Printed in U.S.A.

PART NO. 37-5287E

Replaces 37-5287D

9901

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY

BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE

PERSONAL INJURY AND/OR PROPERTY DAMAGE.

DESCRIPTION

Your new White-Rodgers Digital Thermostat uses the technol-

ogy of a solid-state microcomputer to provide precise time/

temperature control. This thermostat offers you the flexibility to

design heating and cooling programs that fit your needs.

Features:

• Battery powered (3 “AA” Energizer

alkaline batteries in-

cluded)

• Same program for all days of the week

• Simultaneous heat and cool program storage

• Four separate time/temperature settings per program

• Preprogrammed temperature control

• LCD continuously displays set point, and alternately dis-

plays time and room temperature

• Temperature override until next program period

• Manual program override (HOLD temperature)

• User may select either 12- or 24-hour clock display

• °F/°C convertibility

• Temperature range 45° to 90°F

• Standard five terminals for single or dual transformer

systems

• B & O terminals for single stage heat pumps or damper

operation

WHITE-RODGERS

SPECIFICATIONS

ELECTRICAL DATA

Electrical Rating:

8 to 30 VAC 50/60 Hz. or D.C.

0.05 to 1.5 Amps (Load per terminal)

1.5 Amps Maximum Total Load (All terminals combined)

THERMAL DATA

Setpoint Temperature Range:

45°F to 90°F (7°C to 32°C)

Operating Ambient Temperature Range:

32°F to 105°F

Operating Humidity Range:

0 to 90% RH (non-condensing)

Shipping Temperature Range:

-40°F to 150°F

APPLICATIONS

For use with:

• Standard heat/cool or heat only systems

• Electric heat systems

• Gas or oil fired systems

• Gas systems with intermittent ignition devices (I.I.D.) and/

or vent dampers

• Hydronic (hot water or steam) systems

• Single-stage heat pump systems

• Millivolt systems

DO NOT USE WITH:

• Multi-stage systems

• Systems exceeding 30 VAC and 1.5 amps

• 3-wire zoned hydronic heating systems

PRECAUTIONS

Operator: Save these instructions for future use!

This thermostat is intended for use with a low voltage system; do

not use this thermostat with a line voltage system. If in doubt

about whether your wiring is millivolt, line, or low voltage, have

it inspected by a qualified heating and air conditioning contractor

or electrician.

Do not exceed the specification ratings.

All wiring must conform to local and national electrical codes and

ordinances.

This control is a precision instrument, and should be handled

carefully. Rough handling or distorting components could cause

the control to malfunction.

To prevent electrical shock and/or equipment dam-

age, disconnect electric power to system at main fuse

or circuit breaker box until installation is complete.

Do not use on circuits exceeding specified voltage.

Higher voltage will damage control and could cause

shock or fire hazard.

Do not short out terminals on gas valve or primary

control to test. Short or incorrect wiring will damage

thermostat and could cause personal injury and/or

property damage.

CAUTION

WARNING

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - WHITE-RODGERS

WHITE-RODGERS DIVISIONEMERSON ELECTRIC CO.9797 REAVIS ROADST. LOUIS, MISSOURI 63123-53981F80-24Programmable Electronic Digital ThermostatINSTALLATION

Seite 2 - INSTALLATION

2INSTALLATIONREMOVE OLD THERMOSTAT1. Shut off electricity at the main fuse box until installation iscomplete. Ensure that electrical power is disconne

Seite 3 - CHECK THERMOSTAT OPERATION

3CHECK THERMOSTAT OPERATIONIf at any time during testing your system does not operateproperly, contact a qualified serviceperson.Fan OperationIf your

Seite 4 - OPERATION

4Cooling SystemThis thermostat has a built-in short-term (5-minute) time delay.This feature is activated after the compressor shuts down andthe setpoi

Seite 5 - PROGRAMMING YOUR THERMOSTAT

5OPERATING FEATURESNow that you are familiar with the thermostat buttons anddisplay, read the following information to learn about the manyfeatures of

Seite 6 - CHECK YOUR PROGRAMMING

Entering Your ProgramFollow these steps to enter the heating and cooling programsyou have selected.Set Current Time and Day1. Press SET TIME button on

Kommentare zu diesen Handbüchern

Keine Kommentare

White-rodgers 1F80-24 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Schalttafel White-rodgers 1F80-24 herunter. White Rodgers 1F80-24 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schalttafel White-rodgers 1F80-24